Guide · Homeowners and businesses · 4 min read · Updated 17 November 2026
How Much Does Sliding Door Repair Cost in the UK? 2026 Prices
Short answer
A patio door adjustment and service typically costs £80–£150 in the UK in 2026. Replacing the rollers on one patio door panel costs £120–£250, a stainless steel track cap £80–£180 and a sliding door lock replacement £120–£260. Sliding wardrobe wheels and guides cost £80–£160 per set, and automatic door fault visits start from £150 plus parts. Most domestic repairs are completed in one visit.
Typical repair prices
Sliding door repairs are usually priced as a call-out or first-hour charge plus parts. A technician carrying common rollers, track caps, locks, keeps and seals can fix the majority of domestic faults in a single visit. Less common or older systems sometimes need parts ordering, which means a second visit. The table shows typical 2026 guide prices, including fitting, for domestic doors unless stated.
Prices assume a standard domestic door of normal size. Very large or heavy panels, doors on upper-floor balconies and doors where the frame itself is damaged can cost more because they take longer or need two technicians.
| Repair | Typical 2026 price | What is included |
|---|---|---|
| Patio door adjustment and service | £80–£150 | Height adjustment, track clean, lubrication |
| Patio door roller replacement, one panel | £120–£250 | Lift out panel, new rollers, adjust, clean track |
| Stainless steel track cap | £80–£180 | Fitted over a worn rail |
| Sliding door lock replacement | £120–£260 | Mechanism, cylinder and keeps aligned |
| Wardrobe door wheel and guide replacement | £80–£160 | Per set of doors |
| Automatic door fault visit | from £150 | Commercial call-out and diagnosis; parts extra |
Why a service is often all you need
A surprising number of stiff or noisy patio doors do not need new parts at all. Dirt, grit and leaves build up in the bottom track, the rollers pick it up and start to grind, and the door feels heavy. Over time, the panel can also drop slightly as the house settles or the rollers wear, so it rubs on the track or frame. A service at £80–£150 cleans the track thoroughly, lubricates the moving parts and adjusts the roller height so the panel runs level.
If you have not had the door looked at for several years, it is worth starting with a service. The technician will tell you if the rollers are worn beyond adjustment, and you only pay for new parts if they are actually needed.
Rollers, tracks and locks
Rollers are the most common replacement part. Older patio doors often have plastic or nylon wheels that crack, flat-spot or seize, and once that happens the door drags on its track and wears it. Replacing rollers means lifting the panel out of the frame, which on a heavy double-glazed door is a two-person job, fitting new carriages and setting the height. It typically costs £120–£250 per panel.
If the bottom rail itself is worn, dented or corroded, new rollers alone will not fix the problem. A stainless steel track cap fitted over the old rail at £80–£180 gives a new running surface without replacing the frame. Locks are another frequent fault: a mechanism that will not engage, a broken hook bolt or a misaligned keep can usually be put right for £120–£260 with a new mechanism and cylinder.
- Grinding or rumbling usually means worn or dirty rollers.
- A door that scrapes along the bottom may have dropped rollers.
- Bumps at one point in the travel suggest track damage.
- A handle that turns but does not lock points to the mechanism or keep.
What pushes the price up
The make and age of the door matter most. Some older aluminium patio doors and imported systems use parts that are no longer made, so the technician has to find a compatible alternative or adapt a part, which takes time. The weight and size of the panels matter too: very large or triple-glazed panels need two people and sometimes lifting equipment to remove safely.
Frame damage is the other big variable. A track that has split, a frame that has twisted or rotted, or corroded aluminium sections can turn a simple roller job into a bigger repair. Misted or cracked glass units are made to order and priced separately. Out-of-hours call-outs for doors that will not lock or close cost more than standard visits.
Wardrobe, pocket and automatic doors
Sliding wardrobe doors are lighter but have their own common faults: bottom wheels that pop out of the track, top guides that wear, and doors that jump the track when pushed hard. Replacing wheels and guides typically costs £80–£160 per set of doors. Pocket doors that slide into a wall cavity can stick when the track or hangers wear or the wall framing moves, and access to the mechanism varies by design.
Automatic sliding doors in shops, offices and care homes are a different category. A fault visit starts from £150, with sensors, motors and control units priced as parts on top. These doors should be maintained in line with recognised standards, and in workplaces the Workplace (Health, Safety and Welfare) Regulations 1992 require powered doors to have necessary safety devices and be kept in efficient working order.
Repair or replace?
Repair is usually the better value when the frame is sound and only the moving parts, seals or locks are worn. A full service, new rollers and a track cap together cost a fraction of new patio doors. Replacement makes more sense when the frame is corroded or rotten, the sealed units have failed across several panes, parts are no longer available, or the door is single-glazed and you want better insulation.
A good technician will tell you honestly if a door is not worth repairing. Ask them to explain what they found, what each part costs and what life you can expect from the repair before agreeing to the work.
Questions people also ask
How much does it cost to replace patio door rollers?
Replacing the rollers on one patio door panel typically costs £120–£250 in the UK in 2026. That includes lifting out the panel, fitting new rollers, adjusting the height and cleaning the track. If both sliding panels need new rollers, or the track is worn and needs a stainless steel cap, the total will be higher.
Is it worth repairing an old sliding patio door?
Often, yes. If the frame is sound, replacing rollers, seals and the lock usually restores smooth running and security for far less than new doors. If the frame is corroded, the glass units have failed or parts are unavailable, replacement may be better value over the long term.
How long does a sliding door repair take?
Most domestic repairs such as a service, roller replacement or lock change are completed within an hour or two in a single visit. Older or unusual doors may need parts ordering, which means a second visit once the parts arrive. Glass replacement needs measuring, manufacture and a return visit.
Written and checked by the Sliding Door Repair team. Read our editorial policy.
More guides
Why Is My Patio Door Hard to Slide? Causes and Fixes
A patio door that is hard to slide usually has a dirty track, worn or seized rollers, a panel that has dropped and is rubbing, or a damaged bottom…
Sliding Patio Door Won't Lock? Causes and How It Is Fixed
A sliding patio door usually won't lock because the panel has dropped so the hook bolt misses the keep, the keep has moved, the lock mechanism has…
Should You Repair or Replace Sliding Patio Doors?
Repair sliding patio doors when the frame is sound and only rollers, tracks, locks, seals or a single glass unit are worn, as most repairs cost…
Sliding Wardrobe Door Off Track? How to Fix It and When to Call Help
A sliding wardrobe door usually comes off its track because the bottom wheels are worn, broken or set too low, the top guides are worn, or something…
Get a free sliding door repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote