Sliding Door Repair
Track Repair and Replacement
Repairing dented, worn or corroded bottom tracks, or fitting stainless steel track caps to restore a smooth running surface.

What's involved
Rollers run on a raised rail in the bottom of the frame. On aluminium doors the rail can corrode or get dented, and on uPVC doors it wears into grooves, especially if a door has been running on seized rollers. Grit, leaves and pet hair also build up and act like sandpaper. The technician cleans the track thoroughly, checks for damage and either files out minor dents or fits a stainless steel track cap over the worn rail, which gives a hard, smooth running surface without replacing the frame. Drainage slots in the track are cleared to stop water building up and leaking indoors. Where the track is badly damaged on older aluminium frames, a full frame replacement may be the only lasting fix, and the technician will say so. Track caps typically take an hour to fit.
How we handle it
Describe the problem
Use the quote form to tell us the type of door, frame material, what is wrong, and any brand name or markings you can see. Photos or a short video of the door being opened help the technician bring the right parts.
Diagnosis on site
A local technician inspects the rollers, track, lock, seals and glass, tests the running and locking, and explains what has failed and what it will cost to fix before starting any work.
Repair and parts
Common rollers, locks and seals are fitted on the first visit where possible. For less common systems, parts are ordered and a return visit is booked, with the door left secure in the meantime.
Adjust and test
The door is adjusted so it runs level, closes tightly and locks cleanly. The technician tests it several times, checks drainage and seals, and cleans the track to finish.
Advice and aftercare
You get a simple explanation of what was replaced and tips to keep the door running smoothly, such as vacuuming the track regularly and applying a suitable silicone lubricant where recommended.
Price guide
Sliding door repairs are usually priced as a call-out or first-hour charge plus parts. Many problems are fixed in a single visit with common parts carried in the van. Less common or obsolete systems may need parts ordering. These are typical UK guide prices for 2026, including fitting, for domestic doors unless stated.
- Patio door roller replacement, one panel: £120–£250. Includes lifting out the panel, new rollers, adjustment and track clean.
- Patio door adjustment and service: £80–£150. Height adjustment, track clean and lubrication, often fixing stiff running without new parts.
- Automatic door fault visit: from £150. Commercial callout and diagnosis; parts such as sensors and motors are extra.
Questions about track repair and replacement
How much does sliding door repair cost in the UK?
Sliding door repairs typically cost £80 to £150 for adjustment and servicing, and £120 to £250 for replacing rollers on one patio door panel in the UK in 2026. Lock replacements cost around £120 to £260. Wardrobe door wheels cost £80 to £160 per set. Out-of-hours callouts and hard-to-find parts cost more.
How do I clean a sliding door track?
Vacuum the track with a narrow nozzle to remove grit, leaves and hair, then wipe with warm soapy water and a cloth or old toothbrush. Dry it thoroughly. Clear drainage slots with a thin tool. Some manufacturers recommend a silicone lubricant on the track, but avoid oil or grease, which attract dirt.
Is it worth repairing an old sliding door?
It is usually worth repairing an old sliding door if the frame is sound and the glass is not misted, as replacing rollers, locks and seals costs far less than a new door. If the frame is badly corroded, the track is destroyed or several glass units have failed, replacement may give better value and better insulation.
Other services
Patio Door Roller Replacement
Lifting out heavy patio door panels and replacing worn or seized rollers so the door glides with light pressure.
Lock and Handle Repair
Fixing sliding door locks that will not engage, replacing faulty mechanisms, hook bolts, keeps and handles.
Seals, Brushes and Draught Repair
Replacing worn brush pile, gaskets and interlock seals to stop draughts, whistling and water getting in.
Wardrobe and Pocket Door Repair
Fixing sliding wardrobe doors that jump the track and internal pocket doors that stick, drag or will not close.
Automatic Sliding Door Repair
Fault-finding and repair of powered sliding doors in shops, offices and care settings, including sensors, motors and safety checks.
Track Repair and Replacement near you
Get a free sliding door repair quote
Tell us what you need and we'll come back with a clear price.
Request a quote